GRS Gravermeister Model GF500 System + Bulino, Standard, and Large Handpieces

GRS Gravermeister Model GF500 System + Bulino, Standard, and Large Handpieces
GRS Gravermeister Model GF500 System + Bulino, Standard, and Large Handpieces
GRS Gravermeister Model GF500 System + Bulino, Standard, and Large Handpieces
GRS Gravermeister Model GF500 System + Bulino, Standard, and Large Handpieces
GRS Gravermeister Model GF500 System + Bulino, Standard, and Large Handpieces
GRS Gravermeister Model GF500 System + Bulino, Standard, and Large Handpieces
GRS Gravermeister Model GF500 System + Bulino, Standard, and Large Handpieces
GRS Gravermeister Model GF500 System + Bulino, Standard, and Large Handpieces
GRS Gravermeister Model GF500 System + Bulino, Standard, and Large Handpieces
GRS Gravermeister Model GF500 System + Bulino, Standard, and Large Handpieces
GRS Gravermeister Model GF500 System + Bulino, Standard, and Large Handpieces
GRS Gravermeister Model GF500 System + Bulino, Standard, and Large Handpieces

GRS Gravermeister Model GF500 System + Bulino, Standard, and Large Handpieces
Gravermeister GF500 Engraving Compressor Machine + 3 Different Size Handpieces and some gravers. From owners manual: The GRAVERMEISTER fulfills the need for a machine capable of allowing rapid but precise cutting and carving of metal, stone, wood, and ivory.

As well as many other materials. The precise impact control feature of the machine also makes it an ideal tool for stone setting, stippling, matt finishing on jewelry and stipple engraving on crystal, etc.

The skills required to properly operate the GRAVERMEISTER, while not within the ability of everyone, are easily mastered by one who possesses certain obvious, natural skills. Technically, GRAVERMEISTER is an air tool that makes its own special air pulses. These pulses move a hammer piston back and forth inside the handpiece, creating impact power. A foot pedal lets you vary the power instantly as you work.

The impact rate is adjustable from 800 to 1200 impacts per minute. You can engrave deeply in steel and delicately in gold, carve wood effortlessly, set large and small stones with confidence, texture metal quickly, sculpt stone precisely and more. Electric powered GRAVERMEISTER Model Number: GF500.

Paint is worn off in several spots. Spray paint on electrical cord. Dirt and oil has gummed up around parts and dust is stuck to it. I partially cleaned the outside when I got it, but it needs more effort to be perfectly clean.

Metal, spring loaded foot pedal. To vary air pressure instantly from no air, delicate, moderate, strong, and full power. All by adjusting the pressure with your foot. It also includes about 10 foot of new tubing to allow foot pedal to sit on floor and machine on table top or other location.

Dust and gunk build up near pivot. Saves time by letting you switch from one handpiece to another in seconds. Includes main body and two handpiece connectors. Perfect for small stone setting, fine engraving. Includes Allen Hex Wrench to tighten gravers. Set screw check hold square tools.

10" (1.9-2.5 mm) and round tools. 12" (2.2-3.0 mm) diameter. Standard Hammer Handpiece- Medium power.

General purpose for jewelers and engravers. (1.6-3.6mm) round or square. Collet holder paint is well worn and wrench marks surround the hex shaped portion.

Designed for heavy metal engraving, wood carving and other demanding jobs. 19" (1.6-4.8 mm) round or square. Include attached section of old tubing with paint and grime remaining. Some scratches and super-glue scraped off the grey handle. Extra New tubing, about 10 feet section with old small diameter tubing for Bulino Hammer Handpiece. Also another section of old tubing for Standard Hammer Handpiece. All tubing can and should be replaced. It is available at many local hardware stores at minimal cost per foot. Take a section of old tubing to store to match size, if you decide to replace it. Contains original documentation, hole-punched in standard notebook binder. It includes the Operation, Maintenance, Parts Listing from GRS Corporation (15 pages) Info from GAST Manufacturing Corp with parts for Pump and Compressor. Instructions for installation of 2-way Gravermeister handpiece valve. How to sharpen GRS Carbide Square Gravers. I didnt have enough patience or time to practice mastering the tool. I only used it a few hours. It is an incredible machine in more patient hands. You also will need to learn how to master sharpening. The gravers in order to do clean work. A magnifying visor would help you see tiny engraving lines. A swivel ball vise for small metal objects would be a nice addition to consider as well, if you plan to engrave metal or jewelry. 5 small square gravers pre-sharpened and ready to start practicing.

1 E C Muller graver #0. Rear section ground to fit handpiece. 1 E C Muller graver #2. 1 Old pair of Millers Forge USA tweezers.

1 Wood handled stone setter? Square flat ended graver, not a cutting edge. 1 small jar of extra compressor oil. It will be safely sealed inside plastic bags to prevent leaking.

No major cleaning or restoration was attempted. Photos show all parts and current condition.

The item "GRS Gravermeister Model GF500 System + Bulino, Standard, and Large Handpieces" is in sale since Tuesday, February 09, 2016. This item is in the category "Jewelry & Watches\Jewelry Design & Repair\Jewelry Tools\Engraving Tools". The seller is "justme001" and is located in Calabasas, California.

This item can be shipped to United States, to Canada, to Mexico.
GRS Gravermeister Model GF500 System + Bulino, Standard, and Large Handpieces